High-value cargo faces more than one shipping risk. Vibration, impact, tipping, compression, moisture, corrosion, and temperature changes can all cause damage before a shipment reaches its destination. A strong outer crate or pallet is important, but the internal packaging system often determines whether the cargo arrives in working condition.
Dunnage is the group of materials and components used to cushion, support, separate, block, brace, and protect cargo during handling and transport. When properly engineered, dunnage prevents movement, absorbs shocks, controls moisture, and reduces the chance of expensive claims, rework, and delivery delays.
This beginner’s guide explains the main types of dunnage, how to select the right materials, and which common mistakes to avoid.
What Is Dunnage?
Dunnage is any packaging material used to stabilize or protect a load inside a crate, container, truck, railcar, or other transport unit. Depending on the shipment, dunnage may include:
- Foam inserts and cushions
- Blocking and bracing
- Void-fill materials
- Moisture barriers
- VCI paper or film
- Desiccants
- Treated wood components
- Corrugated, honeycomb, or composite supports
Dunnage performs two related but different functions.
Cushioning absorbs shock and protects surfaces from impact. Foam inserts are a common example.
Load restraint prevents the cargo from shifting, tipping, sliding, or colliding with the crate or other components. Blocking, bracing, straps, and structural supports perform this role.
A complete protective packaging solution often uses both. Foam alone may protect against surface scratches but may not stop a heavy machine from moving. Blocking alone may hold a load in place but can transfer damaging forces directly into sensitive components.
The Main Types of Dunnage
1. Foam Inserts and Cushions
Foam is used to surround, isolate, and cushion cargo. It is particularly useful for electronics, instrumentation, finished components, painted surfaces, and equipment with sensitive controls or displays.
Custom foam inserts can be cut or shaped to:
- Support the cargo at designated load-bearing points
- Prevent contact with crate walls
- Separate multiple components
- Protect corners, handles, screens, and control panels
- Absorb vibration and moderate impact
- Create repeatable placement for recurring shipments
Foam selection depends on the cargo’s weight, geometry, fragility, and expected shock loads. A foam that works well for a lightweight electronic component may compress too easily under a heavy metal assembly. Conversely, an overly rigid foam may provide insufficient cushioning.
The insert should support the product without placing pressure on delicate areas. It should also allow the cargo to be loaded and unloaded without tearing, scraping, or forcing the product into position.
2. Blocking and Bracing
Blocking and bracing are structural methods used to control cargo movement. Blocking restricts movement by filling space or positioning material against the load. Bracing uses frames, beams, cleats, supports, or other components to resist movement in specific directions.
These systems are commonly used for:
- Machinery
- Motors and generators
- Aerospace components
- Industrial assemblies
- Steel and fabricated parts
- Large electronic cabinets
- Irregularly shaped freight
The design should account for forward, backward, lateral, and vertical movement. A load that appears stable from the front may still shift sideways during a turn or tip when a forklift accelerates.
Blocking and bracing should contact strong structural areas of the cargo. Avoid placing pressure on thin panels, access doors, connectors, shafts, or other components that are not designed to carry restraint forces.
3. Void Fill
Void fill prevents cargo from building momentum inside a crate or container. Even a small gap can become a problem when a load moves repeatedly during a long transit.
Common void-fill options include:
- Foam blocks
- Corrugated pads
- Honeycomb panels
- Inflatable dunnage bags
- Timber blocking
- Custom-cut composite materials
The appropriate material depends on the size of the void and the load acting against it. Lightweight corrugated fillers may work for small gaps between cartons. Heavy machinery may require engineered blocks, structural frames, or bracing tied into the crate base.
Void fill should not be treated as a substitute for load restraint. A soft material that permanently compresses may leave the load loose after several handling events. For heavy shipments, use void fill together with blocking, bracing, strapping, or a custom skid.

4. Moisture Barriers
Moisture can enter packaging through humidity, condensation, rain, wet handling areas, or changes in temperature during ocean and international transport. Moisture barriers create a controlled enclosure around the cargo.
Common materials include:
- Poly liners
- Heavy-duty polyethylene film
- Barrier bags
- Aluminum foil barrier materials
- Sealed inner liners
For moisture-sensitive cargo, the barrier must be properly sealed. A loose sheet of plastic may not provide meaningful protection if humid air can enter through openings or seams.
Moisture barriers are often used with desiccants. The barrier limits the amount of moisture entering the package, while the desiccant absorbs moisture already trapped inside.
5. VCI Materials
VCI, or volatile corrosion inhibitor, materials protect exposed metal surfaces from corrosion. VCI paper, film, emitters, and bags release corrosion-inhibiting compounds into an enclosed package. These compounds form a protective layer on compatible metal surfaces.
VCI is commonly considered for:
- Machined metal parts
- Steel components
- Automotive assemblies
- Industrial equipment
- Long-term storage
- Ocean and international shipments
VCI is not a universal replacement for moisture control. It must be compatible with the metal, coatings, lubricants, and other materials in the package. For demanding export shipments, VCI may be combined with a sealed moisture barrier and correctly sized desiccant.
6. Desiccants
Desiccants absorb moisture inside a sealed package or container. Silica gel, calcium chloride, and container-grade desiccant products are common options.
The required quantity depends on:
- Internal package volume
- Barrier material and seal quality
- Transit duration
- Climate and route
- Cargo moisture sensitivity
- Moisture contained in wood, cardboard, or other packaging materials
Using one small desiccant pouch in a large export crate is rarely an engineered solution. Desiccant capacity should be matched to the actual packaging environment and expected transit conditions.
How to Choose the Right Dunnage
Dunnage selection should begin with the cargo, not with a material that happens to be available. Consider the following factors before designing the package.
Cargo weight and center of gravity
Heavy or top-heavy cargo requires structural support and positive restraint. Identify the center of gravity and determine where the load can safely bear force.
Fragility and sensitive surfaces
Electronics, optics, instruments, and finished surfaces may require foam isolation, anti-static materials, protective films, or non-abrasive contact points.
Shape and contact points
Irregular cargo often needs custom-molded foam, fitted blocking, or a dedicated internal frame. Standard materials may leave unsupported areas or concentrate force in the wrong location.
Transit route
Truck, rail, air, and ocean transportation produce different handling conditions. Ocean routes add extended exposure to humidity and condensation. Air freight may require lower weight and compact designs. Multi-modal shipments need packaging that can withstand repeated transfers.
Domestic or international destination
International shipments require closer review of wood packaging materials and destination requirements. A crate, pallet, skid, or loose blocking component made from regulated solid wood may need ISPM-15 treatment and marking.
Handling method
The packaging must work with forklifts, cranes, pallet jacks, and loading equipment. A well-protected product can still be damaged if the crate cannot be safely lifted or opened.
Common Dunnage Mistakes to Avoid
Under-bracing heavy cargo
Using a few small blocks or relying only on straps may not control a heavy load. The restraint system must account for movement in every relevant direction and connect to strong points.
Using the wrong foam
Foam that is too soft may bottom out under load. Foam that is too hard may transmit shock rather than absorb it. Material density, thickness, geometry, and compression must be evaluated together.
Ignoring material compatibility
Some foams, films, adhesives, coatings, and VCI products may not be compatible with sensitive surfaces, rubber, painted finishes, or electronics. Confirm compatibility before production packing.
Treating void fill as structural restraint
Void fill can close gaps, but it may not withstand the forces generated by a heavy load. Use structural blocking and bracing when the cargo requires positive restraint.
Adding untreated solid wood during final packing
This mistake creates both a protection risk and a potential export compliance problem. Untreated solid wood used for blocking, bracing, dunnage, pallets, skids, or crate components may be regulated under ISPM-15.
The European Commission’s requirements for wood packaging and dunnage state that applicable wood packaging and dunnage from non-EU countries must be heat treated or fumigated, officially marked, and debarked. For a U.S. origin-country reference, the USDA APHIS wood packaging material page provides domestic guidance on wood packaging material requirements and compliance. The requirements generally do not apply to wood 6 mm thick or less or packaging made entirely from processed wood such as plywood, OSB, and veneer. Destination-country rules should always be confirmed before loading.
The IPPC’s ISPM-15 explanatory document specifically addresses dunnage, packing blocks, bracing, skids, and pallets. It also explains that adding untreated wood during repair, modification, or final packing can compromise an otherwise compliant unit.
Do not assume that an ISPM-15 stamp on the crate makes every later-added piece of wood compliant. Keep treated and untreated materials separated, verify the required markings, and use approved materials for export shipments.

Build Dunnage Into the Packaging Design
Dunnage works best when it is designed at the same time as the crate, pallet, or skid. Upstate Packaging Solutions uses a consultative approach to develop industrial packaging solutions around cargo dimensions, weight, handling requirements, fragility, and destination.
Our services include custom foam inserts, moisture barriers, blocking and bracing, custom shipping crates, pallets, and skids. Designs can also be value-engineered to reduce unnecessary material, improve container utilization, simplify loading, and control freight costs.
Learn more through Upstate Packaging Solutions’ packaging services or request a quote for your next shipment.
Final Checklist
Before closing a crate or loading a shipment, confirm that:
- The cargo cannot shift, tip, or contact the crate walls.
- Foam supports the product without damaging sensitive surfaces.
- Void fill is appropriate for the load and gap size.
- Blocking and bracing are connected to strong structural points.
- Moisture barriers are sealed correctly.
- Desiccant capacity matches the package and transit conditions.
- VCI materials are compatible with the cargo.
- All solid wood used in an export shipment meets applicable ISPM-15 requirements.
- Forklift access, lifting points, and unloading procedures are clear.
The right dunnage system protects more than the product. It helps control claims, reduce delays, maintain export compliance, and improve the total cost of shipping. When cargo is heavy, fragile, moisture-sensitive, or moving internationally, engineered dunnage from an experienced packaging partner provides a more dependable result than improvised materials.
This article is for informational purposes only and does not constitute legal or regulatory advice. Requirements vary by destination and change frequently. Always confirm current obligations with your freight forwarder, customs broker, or the relevant plant protection authority.

