Custom Wood Pallets for Automated Lines: Spec’ing Pallets Your Conveyors Can Actually Run

by P.J. Lawson | Oct 10, 2026 | News and Insights

Automation can improve material flow, but it also exposes weaknesses in pallet design. A pallet that works adequately with a forklift may not move reliably through powered rollers, chain conveyors, accumulation zones, stretch wrappers, or automated storage and retrieval systems.

For logistics managers and operations directors, the practical question is not simply whether a pallet can carry the load. You also need to know whether every pallet in the load cycle has a consistent footprint, stable deck, predictable entry points, and enough stiffness to move through the equipment without stopping production.

Well-designed custom wood pallets can perform effectively in automated environments when the pallet specification is developed around the complete material-handling system.

Start With the Automation Interface

Before selecting lumber dimensions or fasteners, identify every piece of equipment that will contact the pallet. The conveyor, wrapper, rack, forklift, pallet jack, shuttle, and AS/RS system may each interact with the pallet differently.

Your pallet supplier should understand:

  • Conveyor type, including powered roller, chain, belt, or accumulation conveyor
  • Roller spacing, chain locations, transfer points, and guide-rail arrangements
  • Stretch-wrapper turntable or conveyor interface
  • AS/RS shuttle, crane, or fork geometry
  • Racking configuration and beam support locations
  • Forklift and pallet-jack entry requirements
  • Floor-stacking conditions
  • Moisture, temperature, dust, and other environmental factors

A pallet is an interface component. Its bottom construction must match the support pattern of the equipment, while its top deck must support the unit load without creating unstable overhang or excessive flex.

1. Specify the Pallet Feet and Bottom Deck First

The underside of the pallet determines how it contacts rollers, chains, transfer plates, and forks. Pallet feet, blocks, runners, and bottom deck boards must be positioned so the pallet remains supported as it travels through each section of the line.

Important decisions include:

  • The number and location of runners or blocks
  • The spacing between bottom deck boards
  • Whether the bottom deck should be open, closely spaced, or more fully covered
  • The direction of the bottom boards relative to conveyor travel
  • Clearance for forks, pallet-jack wheels, and shuttle mechanisms
  • Whether the pallet must be supported at defined rack-beam locations

Large gaps or poorly positioned bottom boards can allow the pallet to settle between rollers or create uneven contact at transfers. A pallet that rocks, drops, or shifts can interrupt accumulation and cause the unit load to move out of alignment.

For automated lines, the bottom design should be reviewed against an actual conveyor layout rather than selected from a general pallet pattern. Your supplier may need a conveyor drawing, roller-spacing information, or photographs of the transfer points to develop the correct footprint.

2. Control Board Orientation and Lead-Edge Condition

The leading edge of the pallet is the first part to encounter a transfer, stop, guide, wrapper, or shuttle. Its construction can affect how smoothly the pallet enters the next section of the system.

Specify:

  • Which pallet edge leads during normal travel
  • The direction of top and bottom deck boards
  • The location of lead boards and perimeter boards
  • Flush, straight outside edges
  • A consistent edge profile across production runs
  • No loose splinters, broken corners, or projecting fasteners

Board orientation should support the conveyor’s contact points. A lead edge that catches on a guide, transition plate, or neighboring pallet can create a jam even when the pallet’s overall length and width are correct.

This is also where workmanship matters. Protruding nails, staples, screws, or other fasteners can damage belts and rollers, interfere with sensors, or snag adjacent equipment. Broken boards and exposed splinters create similar risks. Automated pallet specifications should include a defined fastener-placement and finished-edge inspection.

Close-up of a custom wood shipping structure with a visible ISPM-15 mark

3. Build for Dimensional Consistency Load to Load

Automation depends on repeatability. If one pallet is slightly wider, taller, more warped, or differently supported than the next, the equipment must accommodate variation that may not have been included in its original design.

The pallet specification should address:

  • Overall length, width, and height
  • Block or runner locations
  • Deck-board thickness and width
  • Board spacing
  • Fork-entry clearances
  • Flatness and allowable warp
  • Moisture condition of the lumber
  • Finished edge and fastener condition

Do not assume that two pallets with the same nominal dimensions will behave identically. Lumber movement, inconsistent board placement, uneven fastener setting, and repairs can change the working geometry.

For repeat production, establish a documented inspection method. It should identify the critical dimensions that affect conveyor travel, wrapper alignment, rack support, and automated fork or shuttle engagement. Consistent inspection can reduce unplanned variation and make it easier to determine whether a jam came from the equipment, the load, or the pallet.

4. Balance Top Deck Coverage With Product Support

The top deck must support the product while allowing the pallet to remain practical to manufacture, handle, and inspect. Full coverage is not automatically the best option, and an open deck is not suitable for every load.

Consider:

  • Product footprint and weight distribution
  • Whether the product has small feet or narrow contact points
  • Whether cartons or components can bridge deck-board gaps
  • Whether product overhang is allowed
  • Whether stretch wrap needs a stable perimeter
  • Whether blocking, bracing, foam, or moisture barriers will be added
  • Whether the pallet will be stored on the floor or in a rack

Product overhang can shift the center of gravity, reduce edge support, and increase the chance of contact with guides or neighboring loads. Underhang can also create problems if the product or its packaging interferes with wrapper components or handling equipment.

Your pallet supplier should review the complete unit load, including cartons, wrap, dunnage, blocking, and bracing. The pallet footprint should support the load in the actual orientation used on the line.

5. Design for Weight, Stiffness, and Load Conditions

A pallet must do more than support a load while stationary. It may be pushed, stopped, transferred, lifted, accumulated, wrapped, stored, and retrieved several times.

The design review should distinguish between:

  • Load resting on the floor
  • Load moving on a conveyor
  • Load being lifted by a forklift or pallet jack
  • Load supported by rack beams
  • Load stacked on another pallet
  • Load transferred through an automated system

Weight affects more than pallet strength. A heavier pallet increases the total moving mass and can affect equipment settings, manual handling, and energy use. Stiffness is equally important. A pallet that bends under a unit load may lose contact with rollers, shift the product, or create alignment problems at a transfer.

For machinery, dense components, or uneven loads, heavy duty skids may be more appropriate than a conventional pallet footprint. A skid can be engineered around the equipment base, lifting points, blocking, and bracing requirements. Upstate Packaging Solutions also builds custom shipping skids for machinery and freight transport.

Custom skids and wood packaging prepared for equipment transport

6. Preserve Forklift Entry Clearances

Automation does not eliminate forklift activity. Forklifts may load the line, remove finished goods, stage rejected units, or reposition empty pallets.

Confirm:

  • Two-way or four-way entry requirements
  • Fork-pocket height and width
  • Fork spacing and approach direction
  • Pallet-jack wheel clearance
  • Clearance beneath bottom boards
  • Any restrictions created by blocks, braces, or perimeter boards

A pallet that runs well on a conveyor may still be difficult or unsafe to handle if the fork pockets are too narrow, obstructed, or inconsistent. The pallet design must account for both automated and manual interfaces.

7. Establish Repair and Replacement Standards

Wood pallets are repairable, but repairs must not introduce new automation problems. A replacement board that is thicker, wider, warped, or fastened differently can change the pallet’s bottom profile or cause a previously stable pallet to catch on equipment.

Create a repair standard that addresses:

  • Which boards may be replaced
  • Approved replacement dimensions
  • Fastener type and placement
  • Removal of protruding or damaged fasteners
  • Acceptable board cracks, splits, and edge damage
  • Maximum allowable warp
  • When a pallet must be removed from service
  • How repaired pallets are identified and inspected

Common jam sources include broken or snagged boards, protruding nails, inconsistent pallet footprints, warped deck boards, and repairs that block fork entry. A clear replacement standard helps maintenance and warehouse teams make consistent decisions instead of returning questionable pallets to the line.

Wood, Plastic, or Metal: Which Is Right for Automation?

Wood is often the practical choice when you need custom dimensions, strong load support, local availability, and repairability. It can be engineered for unusual cargo, machinery bases, custom entry requirements, and one-way or recurring shipping programs.

Plastic may be worth evaluating when dimensional uniformity, smooth surfaces, washdown conditions, and a controlled return loop are priorities. It generally avoids exposed fasteners, but damaged units may be more difficult to repair and may require replacement.

Metal can suit severe loads, high-temperature conditions, or closed-loop systems where long service life justifies greater weight and cost. It may not be the most efficient choice for every shipping program.

The right material depends on your equipment, environment, load, handling cycle, and pallet recovery process. A well-specified wood pallet may be a better fit than a generic plastic or metal pallet when the design must accommodate unusual cargo or heavy industrial handling.

What to Give Your Pallet Supplier

Provide the following information before the design is finalized:

  • Unit-load length, width, height, and total weight
  • Product contact points and load distribution
  • Conveyor type and critical support locations
  • Accumulation and transfer details
  • Stretch-wrapper configuration
  • AS/RS or shuttle requirements
  • Racking versus floor-stacking conditions
  • Forklift and pallet-jack dimensions
  • Moisture, temperature, and storage environment
  • Required top and bottom deck coverage
  • Acceptable product overhang or underhang
  • Repair, inspection, and replacement expectations
  • Domestic or international shipping requirements

If wood packaging will be exported, discuss the applicable treatment and marking requirements with your packaging provider and verify destination requirements. The USDA APHIS export guidance for wood packaging material explains the U.S. program associated with ISPM-15 treatment and marking. Wood 6 mm thick or less, and packaging made entirely from processed wood such as plywood, OSB, or veneer, are generally treated differently under ISPM-15. Confirm the classification of your specific materials before production.

The Bottom Line

Reliable automated conveying starts with a pallet that matches the equipment. Bottom-deck spacing, pallet feet, lead-edge construction, dimensional consistency, deck coverage, stiffness, forklift access, and repair standards all affect throughput and downtime.

A custom pallet specification should be developed around your complete unit load and handling path, not just a nominal length and width. Upstate Packaging Solutions designs and builds custom pallets, skids, crates, and dunnage for industrial shipping applications across South Carolina and beyond. To discuss a conveyor-ready pallet or request a quote, contact Upstate Packaging Solutions.

Informational disclaimer: This article is for informational purposes only and does not constitute legal or regulatory advice. Requirements vary by destination and change frequently. Equipment interfaces, load requirements, repair criteria, final pallet specifications, and export obligations should be reviewed with your automation equipment provider, packaging supplier, freight forwarder, customs broker, or the relevant plant protection authority for your specific application.